How long does drywall and interior finishing take?

A single room refresh often runs a few days to a week depending on drying between coats. A full basement or main floor typically runs one to three weeks from hang to primer-ready, longer if extensive leveling or texture removal is involved. You receive a written timeline before work starts.

What does drywall installation cost in the GTA?

Drywall and finishing costs in the Greater Toronto Area depend on board type, ceiling height, finish level, and access. Small patch jobs may be quoted as a minimum visit; larger areas are priced per square foot with taper finish included. We provide a fixed-price written quote after a site visit.

What is the difference between Level 4 and Level 5 drywall finish?

Level 4 is the standard residential finish under flat or low-sheen paint after primer — joints and fasteners should not telegraph under normal viewing. Level 5 adds a skim coat over the whole surface for critical lighting, gloss paint, or very dark colours. We recommend the level that matches your paint schedule so you do not overpay.

Can you match existing texture or orange peel?

Often yes, within reason. We sample adjacent walls, match spray or hand texture where possible, and flag expectations when old texture or many coats make a perfect match unrealistic.

Do you offer drywall and interior finishing in Mississauga, Vaughan, and North York?

Yes. We work across Toronto and the GTA including Mississauga, Vaughan, North York, Etobicoke, Richmond Hill, and Markham. Travel and service area are included in our quotes — no surprise mileage fees by municipality.

Your drywall & interior finishing contractor

Drywall & interior finishing

Hang, tape, mud, and paint-ready surfaces — one crew and one fixed-price quote for drywall and interior finishing across Toronto and the GTA.

(647) 704-5957

Serving Toronto • North York • Etobicoke • Vaughan • Richmond Hill • Markham • Mississauga • GTA

12+

Years in GTA

4.7★

Google rating

The Adept approach

One crew.
One quote.
Walls that read flat.

Drywall and interior finishing look cheap when corners are rushed and sand marks show through primer. We scope finish level to your lighting and paint, then execute tape-to-prime with one accountable team and a fixed price agreed before we hang the first sheet.

Written scope, sheet counts, and finish level before you commit
Dust control and daily clean-up — built for occupied homes
Primer-ready handoff or seamless handoff to painting on the same crew

What's included

Everything in your drywall and interior finishing scope — in one quote

One crew coordinates board, tape, mud, and primer so you are not juggling separate tapers and painters without a plan. Every line item below is priced before we start.

New drywall supply and install on wood or steel framing — ceilings, walls, and bulkheads with correct screw spacing and gaps

Taping and multi-coat mudding with feathered edges, inside and outside corners, and arch bead where needed

Sanding and inspection between coats so joints disappear under raking light — no rushed covers

Level 4 standard finish or Level 5 skim for critical lighting walls and high-gloss paint schedules

Texture removal, popcorn ceiling take-down, and re-boarding where existing surfaces are unsalvageable

Water damage or insurance repair patches tied into existing board — texture and sheen matched where possible

Priming and paint-ready hand-off, or coordination with our painting scope on the same schedule

Protection of floors and adjacent rooms, HEPA-conscious cleanup, and daily tidy job-site habits

Or call (647) 704-5957

How it works

Your drywall and interior finishing project, step by step

Predictable drying windows, light-checked sanding, and one point of contact from start to primer.

Site visit & scope

We walk the rooms, mark new layouts or repairs, check framing and moisture history, and confirm finish level so drywall and interior finishing pricing is accurate before we load in.

Fixed-price quote

Within 48 hours you receive a written price for board, tape, mud, sand, and prime scope — sheet counts and finish level spelled out, not hidden allowances.

Hang & rough mud

Drywall hung square, staggered joints where it matters, then first beds and tapes — dust contained and debris bagged out regularly.

Fill, sand & detail

Successive coats, feathering, corner straightening, and light check before primer — fasteners dimpled, bumps removed.

Prime & walkthrough

Sealed surfaces ready for paint or handoff to our painters on the same crew — punch list with you before we call the room done.

“They did a great job. They came to do a thorough assessment of the job and provided great suggestions. The project was on schedule and on budget. They made sure I was satisfied afterward, and were good about fixing some issues with my wall they came upon during the job, at no extra cost. Thanks!”

— Jared Kaminsky · Drywall & interior finishing

Our work

Recent drywall & finishing work

View portfolio

Interior finishing

Custom Storage & Built-ins

Full-room transformation

Why Adept

Why homeowners choose us for drywall and interior finishing

Fixed-price written quotes

You get an exact drywall and interior finishing price in writing within 48 hours of the site visit — before you commit to anything.

One crew, start to finish

The same team hangs, tapes, and finishes. Fewer handoffs mean fewer visible joints and callback trips.

Finish-level clarity

We quote the right level of finish for your lighting and paint — so you are not paying for Level 5 where Level 4 is enough.

Trusted across the GTA

Homeowners, designers, and builders refer us because drywall and interior finishing ships on the schedule and price we quote.

Common questions

Drywall & interior finishing FAQs

How long does drywall and interior finishing take?: A single room refresh often runs a few days to a week depending on drying between coats. A full basement or main floor typically runs one to three weeks from hang to primer-ready, longer if extensive leveling or texture removal is involved. You receive a written timeline before work starts.
What does drywall installation cost in the GTA?: Drywall and finishing costs in the Greater Toronto Area depend on board type, ceiling height, finish level, and access. Small patch jobs may be quoted as a minimum visit; larger areas are priced per square foot with taper finish included. We provide a fixed-price written quote after a site visit.
What is the difference between Level 4 and Level 5 drywall finish?: Level 4 is the standard residential finish under flat or low-sheen paint after primer — joints and fasteners should not telegraph under normal viewing. Level 5 adds a skim coat over the whole surface for critical lighting, gloss paint, or very dark colours. We recommend the level that matches your paint schedule so you do not overpay.
Can you match existing texture or orange peel?: Often yes, within reason. We sample adjacent walls, match spray or hand texture where possible, and flag expectations when old texture or many coats make a perfect match unrealistic.
Do you offer drywall and interior finishing in Mississauga, Vaughan, and North York?: Yes. We work across Toronto and the GTA including Mississauga, Vaughan, North York, Etobicoke, Richmond Hill, and Markham. Travel and service area are included in our quotes — no surprise mileage fees by municipality.